Intermediate Program Stops; Running A Program - HP -15C Owner's Handbook Manual

68 Section 6: Programming Basics
Keystrokes Display
2
*
9
.
8
÷
¤
Program End. There are three possible endings for a program:
 | n (return) will end a program, return to line 000, and halt.
 ¦ will stop a program without moving to line 000.
 The end of program memory contains an automatic n.
Keystrokes Display
|n

Intermediate Program Stops

Use ´ © (pause) as a program instruction to momentarily stop a
program and display an intermediate result. (Use more than
longer pause.)
Use a ¦ (run/stop) instruction to stop the program indefinitely. The
program will remain positioned at that line. You can resume program
execution (from that line) by pressing ¦ during Run mode, that is, from
the keyboard.

Running a Program

Run Mode. Switch back to Run mode when you are done programming:
| ¥. Program execution must take place in Run mode.
002-
003-
004-
005-
006-
007-
008-
009- 43 32
2
20
9
Given h in the X-register,
48
lines 002 to 008 calculate
8
10
11
Optional if this is the last
program in memory.
2h
.
9.8
© for a
one