Filter Change; Descaling; Brewer Care - WMF 1300 S User Manual

Software | Care

Filter change

Once the remaining filter life reaches 25 %, the
remaining service life is displayed every time it is
switched on.
When there is 0 % filter life remaining, a reminder that
the water filter needs to be replaced is displayed every
3 hours.
Replacing the filter is necessary to prevent damage
tothe machine.
™ ™ Change the filter
™ ™ Confirm filter change
After filter change there is an automatic program
sequence to rinse and bleed the anti-scale filter and
water system. Hot water runs out of the hot water
spout during this process.

Descaling

The water hardness, flow rate, and whether a water
filter is used are the factors that determine the number
of liters remaining before descaling is required.
This liters indication is calculated and displayed by
the WMF 1300 S.

Brewer care

After 15,000 brewing cycles, the O-ring on the brewer
needs to be replaced.
When the service life has been exceeded, the fact that
it is due for replacement is reported daily.
™ ™ Change the O-ring
™ ™ Confirm the change
52
DS_03_04_01_04
Follow the water filter instructions.
Displays lead step by step through
the program.
Follow the instructions.
DS_03_04_01_07
Descaling
w Care
w starting on page 94
DS_03_04_01_05
User Manual WMF 1300 S
Filter change
Descaling
Brewer care