When needed (weekly)
Mix 5 ml (0.001 gal) of WMF special cleaner or
a special cleaning tablet with 0.132 gal (500 ml) of
warm drinking water
Immerse all four parts in the cleaning solution at
least for 4 hours
After 4 hours, thoroughly rinse under running
drinking water again
Remove the powder hopper and clean the loading
chute to the mixer bowl with a cloth or brush
Allow all parts to dry
On re-assembly, all openings must face in the
same direction.
Insert the mixer
illustration
The green side should be visible after insertion.
Attach mixer hose on the mixer bowl
Replace mixer bowl until it engages in the lock
Attach mixer hose on the combi spout
Hose routing
Always position the hoses correctly on the guide
angle. See illustration.
•
[3]
Milk hose * g below (Basic Milk)
•
[4]
Mixer hose * g top
optional equipment
*
For the milk hose, this only applies to the Basic Milk version.
The disconnected mixer hose can be cleaned using the
cleaning brush (33 1521 9000) as needed.
The disconnected milk hose can be cleaned using the
cleaning brush (33 1580 8000) as needed.
User Manual WMF 1300 S
completely [1]
wheel [2]
as shown in the
Care | Manual cleaning
IMPORTANT
Follow the Warranty chapter
w starting on page 124
3
Accessories and spare parts
w page 129
1
2
4
105