WMF 1300 S User Manual page 8

Safety
Burn hazard / scalding hazard
• When dispensing beverages and
steam, hot liquid comes out of the
spouts. The adjacent surfaces and
spouts become hot.
• Hot steam is produced by the
SteamJet cup warmer. The cups and
adjacent surfaces also get very hot.
• Hot water and steam may escape
from the outlets in the heating-up
phase.
> When dispensing beverages and
steam, do not reach beneath the
spouts.
> Do not reach beneath the spouts
during the heating-up phase.
> Do not touch the spouts
immediately after dispensing.
> Always place an appropriate cup
under the combi spout before
dispensing a beverage.
8
CAUTION
User Manual WMF 1300 S