IO-390-D Series Engine Maintenance Manual
IO-390-D Series Engine Maintenance Manual
Install Stud at Oil Filter Pad (if Required)
1. Apply Food-Grade Anti-Seize to the stud for the oil filter pad.
2. Install the stud using stud driver height setter (Figure A-6).
3. Install the stud to a driven height of 0.60 to 0.64 in. (15.2 to 16.3 mm). Refer to Figure A-7.
Figure A-6
Stud Driver and Trip Template
© 2020 Avco Corporation. All Rights Reserved
March 2020
Stud Driven Height 0.60 to 0.64 in. (15.2 to 16.3 mm).
Figure A-7
Appendix A
Page 295