Lycoming IO-390-D Series Maintenance Manual page 147

IO-390-D Series Engine Maintenance Manual
IO-390-D Series Engine Maintenance Manual
Step
"Propeller Governor Oil Line
Step 31
Installation" procedure in Chapter 72-50
Install the
propeller
governor oil
line (Engine
with rear-
mounted
propeller
governor
drives)
(Figure 30).
Propeller Governor Oil Lines
"Fuel Manifold Installation" procedure
Step 32
in Chapter 73-10
Install the
fuel
manifold
(Figure 31).
"Fuel Injector Installation" procedure
Step 33
in Chapter 73-10
Install the
fuel
injectors
(Figure 32).
"Injection Nozzle Installation"
Step 34
procedure in Chapter 73-10
Install the
injection
nozzles
(Figure 33).
© 2020 Avco Corporation. All Rights Reserved
March 2020
Table 2 (Cont.)
Sequence of Engine Assembly Procedures
Reference
Figure 30
Figure 31
Fuel Manifold
Figure 32
Fuel Injector
Figure 33
Injection Nozzles
Step
"Fuel Line Installation" procedure in
Step 35
Chapter 73-10
Install the
fuel lines
(Figure 34).
Step 36
"Starter Installation" procedure in
Install the Chapter 72-70
starter
(Figure 35).
"Alternator and Bracket Installation"
Step 37
and "Alternator Belt Installation"
Install the
procedures in Chapter 72-70
alternator,
bracket, and
belt
(Figure 36).
Alternator Bracket, Alternator, and
Step 38 Install the engine in the airframe per
instructions in the IO-390-D Series
Install the
Engine Installation and Operation
Engine in
Manual and applicable airframe
the
maintenance manual.
Airframe
Reference
Figure 34
Fuel Lines
Figure 35
Starter
Figure 36
Alternator Belt
72-10
Page 121