Table of Contents
Advertisement
4-30-2.
Attaching of Heat Transfer Sheet
Procedure
1.
Bend the JS BVA heat transfer sheet and JS SPDL DRV heat transfer sheet as shown in the illustration.
2.
Attach the JS BVA heat transfer sheet and JS SPDL DRV heat transfer sheet to the position as shown in the
illustration.
Bending of sheets
JS BVA heat transfer sheet
JS SPDL DRV heat transfer sheet
JS SPDL DRV heat transfer sheet
Notes on attaching
The sheet should
not be detached
from the drive base.
The sheet should
not overlap with
the screw.
Reference
ODS-D280U/ODS-D280F
Mountain fold
Valley fold
Align the plate end.
Align the plate end.
JS BVA heat transfer sheet
Main base assembly
The sheet should not
ride on the bent portion.
0.5 mm
The sheet should not
overlap with the screw.
The sheet should not
be detached from the
drive base.
4-75
Advertisement
Table of Contents
