Removing The Covers; Removing The Sunshield; Removing The Belt Padding And Inlay Cover - KIDDY Relax Pro Directions For Use Manual

ENG

7. Removing the covers

The baby car seat may not be used without its cover. The covers are a
fundamental component of the safety concept! Therefore, use only original
covers from the manufacturer! If you require replacement covers, you can
order them from the manufacturer.
If you want to remove the cover, it is not necessary to dismantle the belt
system of the kiddy relax pro!

7.1 Removing the sunshield

Swivel the sunshield over the rim of the shell and pull the sunshield frame
downwards from the rim of the shell (Fig. 19).
Now pull the sunshield frame through the loops in the sunshield (Fig. 20).

7.2 Removing the belt padding and inlay cover

Release the belt clip (B) and pull the belt clip padding from the clip in an
upwards movement.
Now the Velcro® fasteners on the outsides of the shoulder belt padding (D)
can be opened to remove the padding.
The inlay cover can be removed by opening the Velcro® fasteners next to
the shoulder belts (D). Now the inlay cover can be removed by pulling it
upwards from the headrest (E).
10