Remove / Replacing The Covers; Removing The Sunshade; Removing The Backrest Cover; Removing The Seat Cover - KIDDY Evoluna i-Size 2 Instruction Manual

EN
8. This child seat does not replace a cot or a bed.
Should your child need to sleep, then it should be
placed in a suitable cot or bed.

10. Remove / replacing the covers

10.1 Removing the sunshade

First remove the sunshade from the shell. Proceed as described in
section 5.3. To remove the fabric from the canopy frame detach the
loops from each joint (fig. 26). Hold the sunshade frame, turn one of
the joints and pull it off the canopy frame. The final step is to pull the
fabric off the frame.

10.2 Removing the backrest cover

Undo the buckle and detach the two velcro's which are located at the
sides of the shoulder pad's. Detach the cover from the belt height
adjustment on the backrest. Pull the backrest cover off the shoulder
belts.

10.3 Removing the seat cover

Place the Evoluna i-Size 2 in the lay-back position and pull the cover
off the velcro's front seat and the buckle through the seat cover.

10.4 Replacing covers

To replace the covers proceed in the reverse order as described for
removing the covers (point 10.1–10.3). When you remount the cover,
ensure that the belts are not twisted or have become lodged!
17