Fitting The Belts; Removing The Cover - KIDDY maxi pro Directions For Use Manual

6.5 Fitting the belts

When mounting the belt proceed in the reverse order of dismantling.
Caution! Check the correct belt fitting.

6.6 Removing the cover

In order to remove the covers of the kiddy maxi pro seat pan for cleaning, do
the following:
- Remove the clips of the seat pan cover from the outer rim of the plastic pan
and detach the cover in the lower area from the seat pan.
- Feed the buckle through the seat pan cover (item 6.4.1).
- Remove the shoulder belt and proceed as described in item 6.4.2.
- Also take off the head support cover incl. padding.
Fig.25
In order to be able to remove the seat pan
cover, loosen the straps on the loops (fig.
25/no. 1) on the inside of the seat pan.
Loosen this first in the lower area of the pan.
Then push the head support completely
upward and loosen the straps in the upper
area of the seat pan.
Remove the seat pan cover.
16
ENG