Removing And Replacing The Covers; Removing The Headrest And Seatback Covers - KIDDY COMFORT PRO Directions For Use Manual

Fig.22
Monitor the belts periodically.
For safety reasons, the belt guide cannot be opened in the lowest
headrest positions. If your child is relatively small and heavier than 18 kg, set
the headrest in one of the higher positions for buckling, then readjust it to the
size of your child (be sure to observe Section 5.2). Don't forget to tighten the
belt system.

8. Removing and replacing the covers

Never use your kiddy without its original covers. The covers are part
of the safety concept.
8.1 Removing the headrest and seatback cover
The headrest and seatback cover are sewn together as a single unit.
Slide the adjustable headrest up to the highest position.
Free the cover around the yellow height adjustment handle. Pull the cover off
the headrest from the back toward the front.
Then pull the buckle tongue under the
armrest on the belt buckle side and fasten it
with a noticeable "click."
Make sure that the belts are not twisted and
lie snugly along the body of your child. Also
check that the belt buckle is correctly
positioned.
Now tighten lap belt (step 1) and then the
diagonal belt (step 2) in the direction of the
automatic belt ratchet.
15
ENG