Adjustment Of The Headrest And The 5-Point Belt System; Slacken The Integrated Seat 5-Point Belt System; Adjusting The Headrests And The 5-Point Belt System; Buckling / Unbuckling Of The Baby - KIDDY Relax Pro Directions For Use Manual

ENG

4.3 Adjustment of the headrest and the 5-point belt system

4.3.1 Slacken the integrated seat 5-point belt system

Before you can adjust the headrest (E) or the height of the shoulder belts (D),
the belt system must be slackened.
For this purpose, keep the centre belt button (K) (Fig. 7, No. 1) pressed in
and pull both shoulder belts (D) (Fig. 7, No. 2) out.
Now the headrest (E) or the shoulder belts (D) can be adjusted to the size of
the child or the child can be lifted out of the baby car seat.
4.3.2 Adjusting the headrest and the 5-point belt system
The belt system is connected to the headrest (E), which means the belt
system must not be adjusted separately from the headrest (E)!
To adjust it, pull the height adjustment handle (M) outwards (Fig. 8, No. 1)
and move it in the required direction upwards or downwards (Fig. 8, No. 2).
The headrest (E) must be adjusted in such a way that the shoulder belts are
positioned at the same level as the baby's shoulders (Fig. 9).
Let the height adjustment handle (M) click into place again after the headrest
(E) has been adjusted. Make sure that the belt system is not twisted or
wedged in!

5. Buckling / unbuckling of the baby

Make a point off always buckling up your child when it lies in the baby car
seat (A)!
Slacken the shoulder belts as described in point 4.3.1 and place it over the
side of the rim of the shell.
7