Removing And Replacing The Covers; Removing The Headrest And Seatback Covers; Removing The Shoulder Support Covers - KIDDY DISCOVERY PRO Directions For Use Manual

Monitor the belts periodically.
For safety reasons, the belt guide cannot be opened in the lowest
headrest positions. If your child is relatively small and heavier than 15 kg, set
the headrest in one of the higher positions for buckling, then readjust it to the
size of your child (be sure to observe Section 5.1). Don't forget to tighten the
belt system.

7. Removing and replacing the covers

Never use your kiddy without its original covers. The covers are part
of the safety concept.
7.1 Removing the headrest and seatback cover
The headrest and seatback cover are sewn together as a single unit.
Slide the adjustable headrest up to the highest position.
Free the cover around the yellow height adjustment handle. Pull the cover off
the headrest from the back toward the front.

7.2 Removing the shoulder support covers

Slide the adjustable headrest down to the lowest position. Unsnap the
buttons on the back sides of the shoulder supports. Now you can pull the
covers off the shoulder supports from the bottom to the top.
10
ENG