Removing The Shell Cover; Pulling On The Covers; Cleaning The Seat Covers - KIDDY Relax Pro Directions For Use Manual

7.3 Removing the shell cover

To remove the shell cover, slide the headrest to the uppermost position first.
Now the attachment eyelets (Fig. 21, No. 1) in the lower area can be
unfastened.
Then slide the headrest to the lowest position and unfasten the upper
eyelets (Fig. 21, No. 1).
Now open the Velcro® fasteners next to the lap belts.
Release the attachment hooks on the rim of the shell next to the lap belt
guides (I) and on the side where the head rests.
Now slide the belt clip (B) and the centre belt (J) through the cover (Fig. 22)
and remove.

7.4 Pulling on the covers

To pull the cover on, do it in reverse sequence as when removing the cover
(Point 7.1 - 7.3).
When pulling the cover back on, make certain that the belts are
not twisted or wedged in.

8. Cleaning the seat covers

The covers can be washed at 30 degrees with a washing machine set to the
gentle or delicates cycle. Do not use the spinning cycle and do not dry in a
dryer.
11
ENG