Step by Step
DIAL
and
or
CLEAR
DIAL
REDIAL
Dialing
Dialing with manual call number input
Press Call setup (optional).
Enter the call number.
The LED above Call setup lights up.
The call number is dialed.
Enter the call number.
The LED above Call setup lights up.
The call number is dialed.
When extending a call you can also key in the wanted station
number directly.
If you enter the wrong number: Press Clear.
The extension destination is deleted.
Wait for dial tone and dial again.
Dialing with number redial
Prerequisite: you stored a call number for number redial Æ page 40.
Press Call setup and
press Number redial.
The stored call number is dialed.
Dialing
29