Answering Calls - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
PER
or
LINE 1
or
LINE 2

Answering calls

You must answer a call before you can extend it.
Press Personal call.
The next call on the private line is answered.
Press LINE 1.
The next call on line 1 is answered.
Press LINE 2.
The next call on line 2 is answered.
The ringing tone is disconnected, the LED lights up. The trunk call an-
swered appears in lines 5/6 of the call processing display. If a call is
successful, CONNECTED appears in line 9 of the call processing lay-
out. You can speak to the caller.
Line 5 No. (caller)
6 Name or EXCH
...
9 CONNECTED
In the case of a forwarded call, the forwarding station is indicated in
line 7/8 (identified by an arrow).
7 254 (forwarding station)
8 MEY (name of forwarding user)
9 CONNECTED
If a station appears on the right-hand side, this user had the trunk call
previously.
223 (station not obtained or transferring station)
MAX (name)
NO ANSWER or BUSY or ON-HOOK XFER.
Answering calls
17