Extending To The User On Hold; Extending To An Alternative Destination - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
DIAL
or
PER
or
LINE 1
or
LINE 2
DEST
CLEAR
EXTEND

Extending to the user on hold

If you were unable to contact the extension destination with normal
extending, you can switch back to the user on hold.
Press Call setup.
Press Personal call.
Press LINE 1.
Press LINE 2.
You are now reconnected to the held party.

Extending to an alternative destination

If you were unable to contact the extension destination, you can
switch the user to a different destination after consultation.
Press Call extension.
You hear the dial tone.
Press Clear.
Enter a different call number
and wait for a response.
Press Call transfer.
The two users are connected.
Extending a call
21