Linak Deskline DL7 system User Manual page 12

LINAK recommends that the DESKLINE DL7/DL7R system should be used in push applications.
®
Placement of a monitor directly above the motor may cause malfunction of the monitor. Magnets inside the motor may
interrupt the picture on the monitor depending on the distance and type of monitor.
If this is the case the problem may be solved by placing an iron plate/tube or another magnetic material, some what larger
than the profil between the motor and the tabletop.
The mounting screws on the DP or DPA must be fastened with a max. torque of 1 Nm.
Page 12 of 24