Linak TechLine LA36 User Manual
  1. Manuals
  2. Brands
  3. Linak Manuals
  4. Controller
  5. TECHLINE LA36
  6. User manual

Linak TechLine LA36 User Manual

Linear actuator
Hide thumbs Also See for TechLine LA36:
Table of Contents

Advertisement

Quick Links

Download this manual
Linear Actuator LA36
User Manual
LINAK.COM/TECHLINE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TechLine LA36 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Linak TechLine LA36

Summary of Contents for Linak TechLine LA36

  • Page 1 Linear Actuator LA36 User Manual LINAK.COM/TECHLINE...

  • Page 2: Table Of Contents

    Linear Actuator LA36 | Contents Preface ������������������������������������������������������������������������������������������������������������������������������������������ 4 Terms of use ���������������������������������������������������������������������������������������������������������������������������������� 5 Introduction ����������������������������������������������������������������������������������������������������������������������������������� 6 Safety instructions �������������������������������������������������������������������������������������������������������������������������� 6 Features ����������������������������������������������������������������������������������������������������������������������������������������� 7 Speed and current curves ��������������������������������������������������������������������������������������������������������������� 8 Current limits ������������������������������������������������������������������������������������������������������������������������������ 10 Current cut-offs ��������������������������������������������������������������������������������������������������������������������������� 10 Max Current �������������������������������������������������������������������������������������������������������������������������������� 10 Stroke and built-in tolerances �������������������������������������������������������������������������������������������������������...
  • Page 3 Linear Actuator LA36 | IECEx/ATEX/CCC certified (optional) ��������������������������������������������������������������������������������������������� 71 Warning ���������������������������������������������������������������������������������������������������������������������������������� 72 Max fuse for IECEx/ATEX/CCC actuators ���������������������������������������������������������������������������������� 73 Mounting and replacement of ATEX cables ���������������������������������������������������������������������������������� 74 Replacing an ATEX cable �������������������������������������������������������������������������������������������������������������� 75 ATEX Declaration of Conformity ��������������������������������������������������������������������������������������������������� 77 Contacts �������������������������������������������������������������������������������������������������������������������������������������� 88...

  • Page 4: Preface

    This User Manual does not address the end user� It is intended as a source of information for the equipment or system manufacturer only, and it will tell you how to install, use and maintain your LINAK electronics� The manufacturer of the end product has the responsibility to provide a User Manual, where relevant safety information from this manual is passed on to the end user�...

  • Page 5: Terms Of Use

    LINAK, LINAK subsidiaries, or LINAK affiliates� All sales are subject to the ‘Standard Terms of Sale and Delivery for LINAK A/S’ available on LINAK websites� LINAK and the LINAK logotype are registered trademarks of LINAK A/S� All rights reserved�...

  • Page 6: Introduction

    Introduction Extremely powerful linear actuator able to create reliable movement in most environments� Comes with LINAK integrated controller (IC) and ideal for arduous outdoor environments� Tough applications require equally tough actuator solutions� The actuator LA36 is specifically developed for heavy-duty applications in environments where temperature, moist or dust are causing problems and where there is a need for high lifting capacity and holding load�...

  • Page 7: Features

    Linear Actuator LA36 | Features • 12, 24, 36 or 48 V DC permanent magnetic motor (IC only 12/24 V DC) • Heavy duty aluminium housing for harsh conditions • Highly efficient acme thread spindle • Protection class: IP66 for outdoor use (dynamic)� Furthermore, the actuator can be washed down by a high pressure cleaner (IP69K - static) •...

  • Page 8: Speed And Current Curves

    Linear Actuator LA36 | Speed and current curves The typical values below are made with a stable power supply and an ambient temperature of 20°C� LA36 12 V motor current vs. load 20 mm/ 20 mm/ 16 mm/ 12 mm/ 16 mm/ 12 mm/ 16 mm/...
  • Page 9 Linear Actuator LA36 | LA36 36 V motor current vs. load 20 mm/ 20 mm/ 16 mm/ 12 mm/ 16 mm/ 12 mm/ 16 mm/ 12 mm/ E gear F gear F gear F gear G gear G gear H gear H gear 2000 4000...

  • Page 10: Current Limits

    Linear Actuator LA36 | 10 Current limits Platform Movement 12 V 24 V 48 V Temperature Outwards 13 A Above Inwards 13 A B3, C3, F3 Reference temperature 0°C Outwards 26 A 13 A Below Inwards 26 A 13 A If the actuator's current consumption rises above the set limit, the actuator regulates and tries to keep it below the set current limit by reducing the PWM and therefore also the speed accordingly�...

  • Page 11: Stroke And Built-In Tolerances

    Linear Actuator LA36 | 11 Stroke and built-in tolerances Example for Example Stroke Endstop options Descriptions 200 mm for 200 mm tolerance tolerance stroke Without endstop ? = 00, A3, B3, C3, D3, switches E3, F3, 06, 16, 17, 18, 198 to 202 198 to 202 With Mechanical...

  • Page 12: Mounting Guidelines

    In applications with high dynamic forces LINAK recommends not to use the fully extended or retracted position over longer time, as this can damage the endstop system permanently�...
  • Page 13 It is the application manufacturer’s responsibility to incorporate a suitable safety arrangement, which will prevent personal injury from occurring, if the actuator should fail� Warning! LINAK’s actuators are not designed for use within the following fields: • Offshore installations • Nuclear power generation •...

  • Page 14: Built-In Dimensions

    Linear Actuator LA36 | 14 Built-in dimensions When STROKE <300 = Built-in dimension: 200+STROKE LENGTH When STROKE >300 = Built-in dimension: 250+STROKE LENGTH Minimum built-in dimension: 300 mm Keep a clearance when mounting a bracket When mounting a custom bracket on the moving part of the actuator, please observe the minimum clearance between bracket and cylinder top when fully retracted�...
  • Page 15 Linear Actuator LA36 | 15 Keep a clearance when mounting a bracket Back fi xture Length of stroke <=300 >300 <=300 >300 <=300 >300 Piston rod eye Inner thread - Solid or slotted Outer thread - from the fi xture - to center of from the surface surface the hole...

  • Page 16: La36 With Iecex/Atex/Ccc Built-In Dimensions

    Linear Actuator LA36 | 16 LA36 with IECEx/ATEX/CCC built-in dimensions...

  • Page 17: Cables

    Linear Actuator LA36 | 17 Cables Cable conduits for an LA36 IECEx/ATEX/CCC must be ordered separately, if needed� To order a cable conduits kit, please choose one of the following item numbers: Item number 0368536-00 Item number 0368535-00 (compatible with one cable) (compatible with two cables) The kit contains: The kit contains:...

  • Page 18: Mounting Of Cables

    3�5 ± 0�3 Nm TORX 25IP When changing the cables on a LINAK actuator, it is important that this is done carefully, in order to protect the plugs and pins� Before the new cable is mounted, we recommend that the socket is greased with vaseline, to keep the high IP protection and ensure an easy mounting�...

  • Page 19: Electrical Installation

    Linear Actuator LA36 | 19 Electrical installation • To ensure maximum self-locking ability, please be sure that the motor is shorted when stopped� Actuators with integrated controller provide this feature, as long as the actuator is powered� • When using soft stop on a DC-motor, a short peak of higher voltage will be sent back towards the power supply�...

  • Page 20: Standard

    Linear Actuator LA36 | 20 Standard Platform: 00 and 01 Feedback: Power Power Deutsch Deutsch BROWN BROWN BLUE BLUE Signal Signal Supply for feedback Supply for feedback + RED + RED Deutsch Deutsch Digital output Digital output YELLOW YELLOW Digital output Digital output GREEN GREEN...
  • Page 21 Linear Actuator LA36 | 21 Standard Input/Output Specification Comments The actuator can be equipped with electronically Description controlled Endstop reached out� To extend actuator: Connect Brown to positive Brown To retract actuator: 12 V DC ± 20 % Connect Brown to negative 24 V DC ±...

  • Page 22: Standard With Dual Hall - Relative Positioning

    Linear Actuator LA36 | 22 Standard with Dual Hall - Relative positioning Platform: 00 and 01 Feedback: Power Deutsch BROWN BLUE Signal Supply for feedback + RED Deutsch Digital output YELLOW Dual Hall Digital output GREEN Digital output VIOLET* Digital output WHITE* Supply for feedback - BLACK...
  • Page 23 Linear Actuator LA36 | 23 Standard with Dual Hall and Endstop Reached - Relative positioning Input/Output Specification Comments The actuator can be equipped with Dual Hall that Dual Hall gives a relative positioning feedback signal when the actuator moves� The Dual Hall output is on two Description wires with a phase shift of 90°...

  • Page 24: Standard With Single Hall - Relative Positioning

    Linear Actuator LA36 | 24 Standard with Single Hall - Relative positioning Platform: 00 and 01 Feedback: Power Deutsch BROWN BLUE Signal Supply for feedback + RED Deutsch Single Hall Digital output VIOLET Digital output YELLOW* Digital output GREEN* Supply for feedback - BLACK A Hall pulse consists of two Hall counts�...
  • Page 25 Linear Actuator LA36 | 25 Standard with Single Hall and Endstop Reached - Relative positioning Input/Output Specification Comments Single Hall The actuator can be equipped with Single Hall that Description gives a relative positioning feedback signal when the actuator moves� To extend actuator: Connect Brown to positive Brown...

  • Page 26: Standard With Analogue Feedback - Absolute Positioning

    Linear Actuator LA36 | 26 Standard with Analogue feedback - Absolute positioning Platform: 00 and 01 Feedback: Power Deutsch BROWN BLUE Signal Supply for feedback + RED Deutsch Analogue output VIOLET Digital output YELLOW* Digital output GREEN* Supply for feedback - BLACK If you wish to use the endstop signals, you will have to keep power on the Brown, Blue, Red and Black wires at all times when the actuator is running, and minimum one second before it starts to...
  • Page 27 Linear Actuator LA36 | 27 Standard with Analogue feedback and Endstop Reached - Absolute positioning Input/Output Specification Comments The actuator can be equipped with an electronic Description circuit that gives an analogue feedback signal when the actuator moves� To extend actuator: Connect Brown to positive Brown To retract actuator:...

  • Page 28: Standard With Pwm - Absolute Positioning

    Linear Actuator LA36 | 28 Standard with PWM - Absolute positioning Platform: 00 and 01 Feedback: Power Deutsch BROWN BLUE Signal Supply for feedback + RED Deutsch Digital feedback VIOLET 50% 50% Digital output YELLOW* Digital output GREEN* Supply for feedback - BLACK If you wish to use the endstop signals, you will have to keep power on the Brown, Blue, Red and Black wires at all times when the actuator is running, and minimum one second before it starts to...
  • Page 29 Linear Actuator LA36 | 29 Standard with PWM feedback and Endstop Reached - Absolute positioning Input/Output Specification Comments The actuator can be equipped with an electronic 50% 50% circuit that gives an analogue feedback signal Description when the actuator moves� To extend actuator: Connect Brown to positive Brown...

  • Page 30: Standard With Mechanical Potentiometer - Absolute Positioning

    Linear Actuator LA36 | 30 Standard with Mechanical Potentiometer - Absolute positioning Platform: 00 and 01 Feedback: Power Deutsch BROWN BLUE Signal Supply for feedback + RED Deutsch Analogue output VIOLET Digital output YELLOW* Digital output GREEN* Supply for feedback - BLACK If you wish to use the endstop signals, you will have to keep power on the Brown, Blue, Red and Black wires at all times when the actuator is running, and minimum one second before it starts to...
  • Page 31 Linear Actuator LA36 | 31 Standard with Potentiometer and Endstop Reached - Absolute positioning Input/Output Specification Comments The actuator can be equipped with a mechanical Description potentiometer, 10 kohm� Bourns 0-10 kohm, 5%, 10-Turn To extend actuator: Connect Brown to positive Brown 12 V DC ±...

  • Page 32: Integrated Controller Basic

    Linear Actuator LA36 | 32 Integrated Controller Basic Platform: Power Deutsch 24/48 V DC + BROWN GND - BLUE Signal Digital input Deutsch Digital input BLACK Digital output YELLOW Digital output GREEN Please be aware that if the power supply is not properly connected, you might damage the actuator!
  • Page 33 Linear Actuator LA36 | 33 Integrated Controller Basic Input/Output Specification Comments Easy to use interface with integrated power electronics (H-bridge)� Description The version with “IC option” cannot be operated with PWM (power supply)� 12 V DC ± 20 % Note: Brown 24 V DC ±...

  • Page 34: Integrated Controller Advanced

    Configuration of IC Advanced is possible with the BusLink software for PC The newest version is available online at LINAK�COM/TECHLINE Please note: The BusLink configuration cable must be purchased separately Item number for BusLink cable kit: 0367999 (adapter + USB2Lin)
  • Page 35 Linear Actuator LA36 | 35 Integrated Controller Advanced Input/Output Specification Comments Easy to use interface with integrated power electronics (H-bridge)� The actuator can also be equipped with electronic circuit that gives an absolute or relative feedback Description signal� The version with “IC option” cannot be operated with PWM (power supply)�...
  • Page 36 Linear Actuator LA36 | 36 Input/Output Specification Comments Ripple max� 200 mV Analogue feedback (0-10 V): Transaction delay 20 ms Configure any high/low combination Linear feedback 0�5 % between 0-10 V Max� current output� 1 mA Output voltage min� V - 2 V Max�...
  • Page 37 Linear Actuator LA36 | 37 • Current cut-offs should not be used as stop function! This might damage the actuator� Current cut-offs should only be used in emergencies! • Current cut-off limits are not proportional with the load curves of the actuator� This means that the current cut-offs cannot be used as load indicator�...

  • Page 38: Integrated Controller Parallel

    Linear Actuator LA36 | 38 Integrated Controller Parallel Platform: Power Deutsch Actuator 8 Actuator 7 Actuator 6 Actuator 5 Actuator 4 Signal Deutsch Actuator 3 Actuator 2 Actuator 1 Power 12/24 V DC+ BROWN GND - BLUE Signal Digital input BLACK Digital input Parallel Com...
  • Page 39 Linear Actuator LA36 | 39 Integrated Controller Parallel Input/Output Specification Comments Parallel drive of up to 8 actuators� A Master actuator with an integrated H-bridge controller controls up to 7 slave Description actuators� The version with “IC option” cannot be operated with PWM (power supply)�...
  • Page 40 Linear Actuator LA36 | 40 The parallel system The parallel drive function will support a number of actuators working jointly: It is both possible to run parallel with a single power supply, or to run each actuator with separate power supplies: Only standard power and signal cables are available for parallel�...
  • Page 41 The BusLink software tool is available for parallel and can be used for: Configuration, Manual run and Diagnostics (service counter) The BusLink software can be downloaded here: https://www�linak�com/segments/techline/ic-integrat- ed-controller/ For more information and easy set-up of BusLink, please follow this link to view the Quick Guide for BusLink: https://cdn�linak�com/-/media/files/brochure-source/en/techline-buslink-quick-guide-brochure-...
  • Page 42 Linear Actuator LA36 | 42 • In case an actuator drops off the line due to e�g� a damaged signal cable, the parallel system will stop immediately • In case one of the actuators are broken, the system will not move; not even after re-powering�...
  • Page 43 Linear Actuator LA36 | 43 System Monitoring for Parallel: If one of the actuators have one of the following error conditions, the actuator will immediately STOP: • H-Bridge fault • Out of the temperature range (High duty cycle protection) • Overcurrent (Current cut-off if one or all actuators go in mechanical block) •...
  • Page 44 Linear Actuator LA36 | 44 IC - Parallel manual service mode: With the Parallel Manual Service mode it is possible to drive one or more parallel actuators separately, using the Red and Black wire from each actuator� An example: if there are 4 actuators in the system and one is removed, the remaining 3 actuators will still be operational simultaneously - so long as they are connected via the Violet and White wires, and given that ‘Parallel manual service mode’...

  • Page 45: I/O Basic

    Connect the actuator to Actuator Connect via Bluetooth ® or a USB adapter cable (must be purchased seperately), and request an unlock key from your local LINAK office� The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc� ®...
  • Page 46 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc� ® Any use of such marks and logos by LINAK is under license� ® Find more information about the IC - I/O actuators in the IC - I/O user manual...

  • Page 47: I/O Customised And Full

    **If 'endstop reached' is not used, a 6-pin connector can be chosen, where the alternative pins are used� The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc� ® Any use of such marks and logos by LINAK is under license� ®...
  • Page 48 I/O Customised and Full Input/Output Specification Comments Description IC - I/O is a universal industrial interface developed by LINAK © � I/O is a common term used, to describe inputs and outputs As part of the IC (Integrated Controller) range, the IC - I/O interface it is offering a range of flexible digital and analogue in- and outputs�...
  • Page 49 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc� ® Any use of such marks and logos by LINAK is under license� ® * Customisable: The I/O Customised actuator is configured based on customer needs - for detailed information please compare the label with the ordering example in the data Sheet�...

  • Page 50: Fcc Statement - La36 I/O With Bluetooth

    7. FCC ID and IC A unique identifier assigned to a device registered for legal sale of wire less devices 8. W/O #12345678-0001 The LINAK work order followed by a unique sequential identification number...

  • Page 51: Can Bus J1939 (Switch)

    The BusLink software tool is available for CAN bus actuators and can be used for: Diagnostics, manual run and configuration The newest version is available online at LINAK�COM/TECHLINE Please note: The BusLink configuration cable must be purchased separately Item number for BusLink cable kit: 0367997 (adapter + USB2Lin)
  • Page 52 The standard/default cables delivered with CAN actuators do not comply with this� BusLink cables must be purchased separately from the actuator! Find more information about the CAN bus actuators in the CAN bus user manual The newest version is available online at LINAK�COM/TECHLINE...

  • Page 53: Canopen (Switch)

    The BusLink software tool is available for CANopen actuators and can be used for: Diagnostics, manual run and configuration The newest version is available online at LINAK.COM/TECHLINE Please note: The BusLink configuration cable must be purchased separately Item number for BusLink cable kit: 0367997 (adapter + USB2Lin)
  • Page 54 Linear Actuator LA36 | 54 CANopen Input/Output Specification Comments Compatible with the CiA 301 standard� Using CANopen messages to command movement, setting parameters and to Description deliver feedback from the actuator� Actuator identification is provided, using standard CiA 301 address claim or fixed addresses Note: 12 V DC ±...
  • Page 55 Linear Actuator LA36 | 55 Troubleshooting Symptom Possible cause Action Motor runs but Gearing system or spindle Please contact LINAK spindle does not damaged move No motor sound or The actuator is not properly Check the connection to the power supply...
  • Page 56 - Reason for last stop (page 62) - Current cut-off levels in both directions Actuator cannot hold Load is higher than specified Reduce the load the chosen load For further assistance, please contact your local LINAK supplier.

  • Page 57: Troubleshooting For Parallel

    Linear Actuator LA36 | 57 Troubleshooting for Parallel Symptom Possible cause Action Actuators do not The actuators are not properly Check the connection to the power supply move connected to the power supply or the external control unit (if any) Please make sure that the power supply polarity is properly connected, otherwise you might damage the actuator...
  • Page 58 Then wait 10 seconds before the Run In/Run Out signals are activated Only for Non-critical Parallel: Even if all actuators are not connected, the connected actuators will run after re-powering� For further assistance, please contact your local LINAK supplier...
  • Page 59 Either initialise the actuators one at a time through BusLink, or use the Parallel manual service mode� In case the initialisation does not solve the issue, please contact your local LINAK supplier For more information and easy set-up of BusLink, please follow this link to view the Quick Guide for BusLink: https://cdn�linak�com/-/media/files/brochure-source/en/techline-buslink-quick-guide-...

  • Page 60: Maintenance

    LINAK service centre� In order to avoid the risk of malfunction, all actuator repairs must only be carried out by an authorised LINAK Service shop or repairer, as special tools and parts must be used�...

  • Page 61: Manual Hand Crank

    Linear Actuator LA36 | 61 Manual hand crank The manual hand crank can be used in the case of a power failure and is only intended for emergency use� 6 mm Allen key The cover over the Allen key socket must be unscrewed before the Allen key can be inserted and the hand crank operated�...

  • Page 62: Label For La36

    It is important that the operator follows the instructions of the duty cycle; otherwise, a possible overload may result in reduced product life/errors 7� W/O #1234567-0001 The LINAK work order followed by a unique sequential identification number...

  • Page 63: Declaration Of Conformity

    Linear Actuator LA36 | 63 Declaration of Conformity DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator (LA36 std.) 36*****0*******, 36*****1*******, 36*****2******* (LA36 std.) 36*******000**-***************, 36*******001**-*************** 36*******B00**-***************, 36*******B01**-*************** 36*******C00**-***************, 36*******C01**-*************** 36*******F00**-***************, 36*******F01**-*************** 36*******H00**-***************, 36*******H01**-***************...
  • Page 64 Linear Actuator LA36 | 64 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator (LA36 std.) 36*****0*******, 36*****1*******, 36*****2******* (LA36 std.) 36*******000**-***************, 36*******001**-*************** 36*******B00**-***************, 36*******B01**-*************** 36*******C00**-***************, 36*******C01**-*************** 36*******F00**-***************, 36*******F01**-*************** 36*******H00**-***************, 36*******H01**-*************** 36*******K00**-***************, 36*******K01**-*************** 36*******P00**-***************, 36*******P01**-*************** 36*******Z00**-***************, 36*******Z01**-*************** (LA37 std.) 37*****0*******, 37*****1*******, 37*****2*******...
  • Page 65 Linear Actuator LA36 | 65 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator (LA36IC) 36*****7*******, 36*****8*******, 36*****9*******, 36*****B******* (LA36IC) 36********03**-***************, (LA36IC) 36********13**-*************** (LA36IC) 36********23**-***************, (LA36IC) 36********33**-*************** (LA36IC) 36********43**-***************, (LA36IC) 36********53**-*************** (LA36IC) 36********63**-*************** (LA37IC) 37*****7*******, 37*****8*******, 37*****9*******, 37*****B*******...
  • Page 66 Linear Actuator LA36 | 66 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator 36********B32*=**************, 36********B34*=**************, 36********F32*=**************, 36********F34*=**************, 36********C32*=**************, 36********C34*=************** 37********B32*=**************, 37********B34*=**************, 37********F32*=**************, 37********F34*=**************, 37********C32*=**************, 37********C34*=************** (The ‘*’ in the product description can either be a character or a number, thereby defining the variation of the product) complies with the Radio Equipment Directive (RED) 2014/53/EU according to following standards: EN 300 328 V2.2.2.
  • Page 67 Linear Actuator LA36 | 67 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator 36********B32*-**************, 36********B34*-**************, 36********F32*-**************, 36********F34*-**************, 36********C32*-**************, 36********C34*-************** 37********B32*-**************, 37********B34*-**************, 37********F32*-**************, 37********F34*-**************, 37********C32*-**************, 37********C34*-************** (The ‘*’ in the product description can either be a character or a number, thereby defining the variation of the product) complies with the Radio Equipment Directive (RED) 2014/53/EU according to following standards: EN 300 328 V2.2.2.
  • Page 68 Linear Actuator LA36 | 68 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator (LA36 BUS) 36*****AD***B** (LA36 BUS) 36********04***************** (LA37 BUS) 37*****AD***B** (LA37 BUS) 37********04***************** (The ‘*’ in the product description can either be a character or a number, thereby defining the variation of the product)
  • Page 69 Linear Actuator LA36 | 69 DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares that Actuator 36********A72B=**************, 36********A74B=**************, 36********A82B=**************, 36********A84B=************** 37********A72B=**************, 37********A74B=**************, 37********A82B=**************, 37********A84B=************** (The ‘*’ in the product description can either be a character or a number, thereby defining the variation of the product)
  • Page 70 DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY LINAK A/S Smedevænget 8 DK - 6430 Nordborg Herewith declares that LINAK TECHLINE ® products as characterized by the following models and types: Linear Actuators LA12, LA14, LA22, LA23, LA25, LA30, LA35, LA36, LA37...

  • Page 71: Iecex/Atex/Ccc Certified (Optional)

    Linear Actuator LA36 | 71 IECEx/ATEX/CCC certified (optional) LA36 can be ordered in an Ex certified version designed for installation in dust-filled atmospheres, such as grain handling facilities, cement plants, saw mills and other dusty surroundings� Please note: The approval is for dust only, NOT for gas� The IECEx/ATEX versions are suitable for applications in Group IIIC, Category 2D�...

  • Page 72: Warning

    • No changes are to be made to the actuator after delivery� This manual is part of the equipment� LINAK A/S keeps the right to modify specifications without advanced notice� Spare this manual for later use...

  • Page 73: Max Fuse For Iecex/Atex/Ccc Actuators

    Linear Actuator LA36 | 73 Max fuse for IECEx/ATEX/CCC actuators Type Spindle Load max. Typical Amp. at full load Max fuse Pitch Push/Pull (mm) 36 V 24 V 12 V 36 V 24 V 12 V 36080xxxxxxAxxxxH��� 6800 17�0 36120xxxxxxAxxxxF��� 2600 21�0 36120xxxxxxAxxxxG���...

  • Page 74: Mounting And Replacement Of Atex Cables

    We recommend to take some precaution and design the wire connection in a way, where the cable end is kept inside a closed, protected area to guarantee the high IP protection� LINAK employees must attend and pass the ATEX course in Talentsoft in order to be qualified to replace cables on ATEX actuators�...

  • Page 75: Replacing An Atex Cable

    Linear Actuator LA36 | 75 Replacing an ATEX cable Right side: Powerplug (0363106) Middle: Screw (0002267) Left side: Signal plug (0363105)' The colour of the O-ring has to be brown (see picture) to be used in ATEX certified installations� O-rings with other colours, such as yellow, are not allowed�...
  • Page 76 Linear Actuator LA36 | 76 Replacing an ATEX cable Correct mounting of cables: The brown O-ring may not be visible� Incorrect mounting of cables: The brown O-ring is visible - the application is NOT tight� Incorrect mounting of cables: The brown O-ring is visible - the application is NOT tight�...

  • Page 77: Atex Declaration Of Conformity

    Linear Actuator LA36 | 77 ATEX Declaration of Conformity...
  • Page 78 Linear Actuator LA36 | 78...
  • Page 79 Linear Actuator LA36 | 79...
  • Page 80 Linear Actuator LA36 | 80...
  • Page 81 Linear Actuator LA36 | 81 CERTIFICATE FOR CHINA COMPULSORY PRODUCT CERTIFICATION No.: 2021312307000228 Applicant LINAK (SHENZHEN) ACTUATOR SYSTEMS LTD. Block B, Shanghe Industrial Park, Nanchang Road, Xixiang Street, Address Bao'an District, Shenzhen Manufacturer LinakA/S Address Smedevrenget 8, Gud�rup, 6430 Nordborg, Denmark...
  • Page 82 Linear Actuator LA36 | 82 CERTIFICATE FOR CHINA COMPULSORY PRODUCT CERTIFICATION (Annex) No.: 2021312307000228 Page 1 of 6 Product information: T his certificate covers the following models: 36XXX XXX X X XX X X X X X X XXXX X X X X X X a: Actuator Ty p e 36=LA36 b: Spindle Pitch 0B0=Bmm...
  • Page 83 Linear Actuator LA36 | 83...
  • Page 84 Linear Actuator LA36 | 84...
  • Page 85 Linear Actuator LA36 | 85...
  • Page 86 Linear Actuator LA36 | 86...
  • Page 87 Linear Actuator LA36 | 87...

  • Page 88: Contacts

    Brazil New Zealand PT. Himalaya Everest Jaya LINAK New Zealand Ltd Phone: +6 221 544 8956 /+6 221 544 8965 LINAK Do Brasil Comércio De Atuadores Ltda. Phone: +55 (11) 2832 7070 Phone: +64 9580 2071 Fax: +6 221 619 1925 LINAK U.S.

This manual is also suitable for:

Techline la36ic

Table of Contents