- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation
and can be operated via a DMX controller or it independently performs its show program in succession.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
3.2 BASIC
Access control panel functions using the four panel buttons located directly underneath the LED Display
(fig.3).
MODE
Pressing this button, can select
the operating mode: AUTO, DMX,
SLAV, SOUN, Pr.
FULLMOON
Mode Setup Up Down
SETUP
Button to acces the settings
of different operating
modes.
UP
Button to select the values
in ascending order of the
function.
DOWN
Button to select the values
in descending order of the
function.
Fig.3 - Functions of the buttons
7