Arrow Laverne 451 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Arrow Manuals
  4. Indoor Furnishing
  5. Laverne 451
  6. Assembly instructions manual

Arrow Laverne 451 Assembly Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS
Laverne
ITEM NO.: 451 White
455 Teak

Advertisement

Table of Contents
loading

Related Manuals for Arrow Laverne 451

Summary of Contents for Arrow Laverne 451

  • Page 1 ASSEMBLY INSTRUCTIONS Laverne ITEM NO.: 451 White 455 Teak...

  • Page 2: General A Ssembly Guidelines

    Insert bolt through pre-drilled Screw cam bolts flush as Turn clockwise to lock cam with bolt. illustrated. surface. The arrow direction must hole in edge of panel. be in the direction of the hole. Tip: place a small bit of WD-40 or similar lubricant into the pre-installed cam bolt holes to help the cam bolts screw in better.
  • Page 3 Par ts List: Panels ITEM DESCRIPTION QTY. PACK. ITEM DESCRIPTION QTY. PACK. Top Panel 2 of 3 Quilt Leaf Panel 2 of 3 Back Panel 2 of 3 Cover Panel 2 of 3 Lift Panel 1 of 3 Left Side Panel 1 of 3 Center Panel 1 of 3...

  • Page 4: Par Ts List: Hardware

    Par ts List: Hardware TIP: Keep all the parts in their individually labeled bags. This will make finding parts easier as you assemble your cabinet. 6x35 Cam Bolt x34 ⁄ “ Cam Cover x34 8x30 Dowel Pin x34 3.5x16 Screw x34 4x16 Screw 3x30 Screw Hinge x4...

  • Page 5: Step 1: Cabinet Shell

    Step 1: Cabinet Shell Congratulations and welcome to Arrow Sewing Furniture! We can’t wait to get your brand new Laverne Sewing Cabinet up and running. Please contact our Customer Service Team at 1-800-533-7347 ext. 1 during normal business hours with any assembly related questions.
  • Page 6 Step 1: Cabinet Shell 6x35 Cam Bolt x2 8x30 Dowel Pin x16 ⁄ “ Cam Cover x4 Insert 2 d1 Dowel Pins into each of the two O2 Panels. Attach the two O2 Panels to Panel G as shown. Tighten cam locks and apply c2 Cam Covers. Set Panel G aside.
  • Page 7 Step 1: Cabinet Shell 6x35 Cam Bolt x2 8x30 Dowel Pin x10 3.5x16 Screw x6 Attach 2 c1 Cam Bolts and 4 d1 Dowel Pins to Panel Z. Attach Lift Rail (Right) to Panel Z using s1 Screws. NOTE: There are two pre-drilled holes for the lift rail: top and bottom. Affix these screws first, and then add a third screw in the center of the lift rail.
  • Page 8 Step 1: Cabinet Shell 6x35 Cam Bolt x4 8x30 Dowel Pin x8 Attach 2 c1 Cam Bolts and 6 d1 Dowel Pins to Panel X. Attach 2 c1 Cam Bolts and 2 d1 Dowel Pins to Panel O1. Laverne Assembly Instructions...
  • Page 9 Step 1: Cabinet Shell ⁄ “ Cam Cover x8 Attach Panels X, Y and Z to Panel D as shown. Tighten cam locks and apply c2 Cam Covers. Attach Panel O1 to Panel X as shown. Tighten cam locks and apply c2 Cam Covers.

  • Page 10: Step 2: Attaching The Base

    Step 2: Attaching the Base ⁄ “ Cam Cover x11 Attach Panel G to Panels O1, X, D, Y and Z as shown. Tighten cam locks and apply c2 Cam Covers. Make sure casters are locked and flip cabinet up onto its wheels. You may need a friend to help you, but it is not required.
  • Page 11 Step 3: Lift LIFT INSTALLATION WARNING: DO NOT remove the small wooden block from the Lift until assembly is complete. If the block is removed or falls out before lift assembly is complete, the cables will retract, making installation more difficult. If the block falls out before complete assembly, Please call Customer Service at 1-800-533-7347, ext.
  • Page 12 Step 3: Lift Guide Lift onto Lift Rails using plastic guides. Insert ends of cable into rail tabs; make sure the cable is hooked into the rail tabs on both sides. NOTE: See Page 13 for close-up illustrations of Lift Panel assembly. Cut the zip tie on the wooden block, but DO NOT remove the block yet.
  • Page 13 Step 3: Lift Cable Lift rail Rail tabs Plastic guides on Lift Lift rail Laverne Assembly Instructions...
  • Page 14 Step 4: Attaching the Top 6x35 Cam Bolt x11 Metal Support Bar x1 3x30 Screw Attach c1 Cam Bolts to Panel A1 as shown. Attach Metal Support Bar to Panel A1 using s3 Screws. Metal Support Bar Laverne Assembly Instructions...
  • Page 15 Step 4: Attaching the Top ⁄ “ Cam Cover x11 Carefully lower top Panel A1 onto Panels O1, X, D, Y and Z as shown. Tighten cam locks and apply c2 Cam Covers. Laverne Assembly Instructions...
  • Page 16 Step 5: Gate Legs and Quilt Panel Alignment Pin 6x25 Bolt and nut x2 Hinge x4 4x16 Screw Caster x2 Screw Alignment Pins into the top edges of Panels Y and Y1. Attach h2 Hinges to Panels Y and Y1 Attach t2 Casters to Panels Y using s2 Screws.
  • Page 17 Step 5: Gate Legs and Quilt Panel 4x16 Screw Attach Gate Leg Panels Y and Y1 to Panel D using s2 Screws. Laverne Assembly Instructions...
  • Page 18 Step 5: Gate Legs and Quilt Panel 4x16 Screw Hinge x3 Attach h1 Hinges to Panel A2 as shown, using s2 Screws. Laverne Assembly Instructions...
  • Page 19 Step 5: Gate Legs and Quilt Panel 4x16 Screw Extend Gate Leg Panels Y and Y1. Balance Panel A2 on gate legs and attach h1 Hinges to Panel A1 using s2 Screws. Laverne Assembly Instructions...
  • Page 20 Completed Laverne Sewing Cabinet Laverne Assembly Instructions...

  • Page 21: Limited Warranty

    (detailed receipt), and photos of the product. Arrow will replace any defective part (at its sole option), excluding labor. Replacement parts will be warranted for only the remaining period of the original Warranty.
  • Page 22 COMPLETE YOUR SEWING STUDIO! Elevate your sewing experience with Arrow’s Best-Selling Accessories! Custom Sewing Inserts Sewing Chairs Enhance your sewing experience with a custom acrylic Arrow’s #1 Rated Height Adjustable Sewing Chair is sewing insert! Custom acrylic sewing inserts are...

This manual is also suitable for:

Laverne 455

Table of Contents