General A Ssembly Guidelines - Arrow Laverne 451 Assembly Instructions Manual

General A ssembly Guidelines

1. Read the instructions carefully before beginning the assembly process to ensure proper assembly
of this product. Please open and inspect the contents of box(es) to see that all parts and hardware
are included.
2. Tools Required
Phillips Screwdriver
3. Understanding How the Cam Fastener Works
Screw cam bolts flush as
illustrated.
Tip: place a small bit of WD-40 or similar
lubricant into the pre-installed cam bolt
holes to help the cam bolts screw in better.
4. Glue provided is to secure wood dowels in place and is optional. If glue is used during assembly,
locate the appropriate hole for the dowel, place a small amount of glue in the hole and insert the
dowel. Wipe away excess glue immediately. It is not necessary to glue the other end of the dowel
when attaching to other parts.
Use and Care Your cabinet normally requires a minimum amount of maintenance; however, the
following points are worth noting:
Cleaning – To remove marks and enhance the surface, wipe with a gentle all-purpose cleanser. DO NOT
use ammonia-based, harsh chemicals or abrasive cleaning agents. Wipe dry immediately.
Electrical and Hydraulic Lifts – Require annual lubrication with WD-40 or similar lubricant.
Laverne
Press cam into hole until flush with
surface. The arrow direction must
be in the direction of the hole.
Hammer
Insert bolt through pre-drilled
hole in edge of panel.
2
Electric Screwdriver
Torque set to 3-5
180°
Turn clockwise to lock cam with bolt.
Assembly Instructions