Uploading A Firmware File - Extron electronics Quantum Ultra Series User Manual

4. On the login page that appears next, fill in the required information to log into the
www.extron.com
representative).
5. Follow the instructions on the rest of the download screens to save the executable
firmware file to your computer. Note the folder to which the file was saved.
6. Locate the downloaded executable file on your computer and open it.
NOTE: When downloaded from the Extron website, by default the firmware is
placed in a folder at:
C:\Program Files (x86)\Extron\Firmware\Quantum Ultra
7. Follow the instructions on the Installation Wizard screens to install the new
firmware on your computer. A Release Notes file, providing information on what
has changed in the new firmware version, and a set of instructions for updating the
firmware are also loaded.

Uploading a Firmware File

To upload a new firmware file to the Quantum Ultra:
1. Copy the new, unpacked firmware file to a USB flash drive or to a CD for use in a
secure location.
2. Plug the flash drive into one of the System USB ports on the rear panel (see
figure 54).
Figure 54.
NOTE: A portable CD, DVD, or Blu-Ray drive can be used, but cannot be
powered by the USB connection to the Quantum Ultra.
3. On the Control Panel window, click the Service Mode button (see figure 47,
on page 51).
4. Copy the firmware file from the USB drive to the root directory of the D: drive.
On the Control Panel window, click the Update Firmware button (
5.
website (if you need an Extron Insider ID number, see your Extron
SYSTEM
USB System Ports on the Rear Panel
Quantum Ultra Series Videowall Processing Systems • Operation
USB System Ports
for Flash Drive
.
6
).
3
55