Basic Weighing Function - Sartorius WZA N Series Installation Instructions Manual

14

Basic Weighing Function

Features
– Taring the weigh cell
– Print weight value
Preparation
§ Switch on the weigh cell:
Press the e key
§ Tare the balance/scale, if necessary:
Press w
$ If necessary, change the configuration
settings:
see the chapter entitled "Configuration"
$ If desired, load the factory settings:
see the chapter entitled "Configuration"
Additional Functions:
$ Switching off the weigh cell:
Press e
Example:
Determine a weight value
Step
1. Switch on the weigh cell:
Self-test runs
followed by automatic
initial tare function.
2. Place container on weighing pan
(in this example 11.5 g).
3. Tare the weigh cell
4. Place sample in container
(in this example 4.66 oz).
5. Print weight value
Press key Display/Printout
e
0.0 g
+
w
0.0 g
+
132.0 g
r
N +
11.5 g
132.0 g