Configuration (Operating Menu) - Sartorius WZA N Series Installation Instructions Manual

Configuration (Operating Menu)

Purpose
The weigh cell is configured at the
factory. In Setup, you can configure the
weight cell, i.e. adapt it to individual
requirements.
Features
The weighing parameters are combined
into the following groups (menu
level 1):
1. Weigh cell functions
– Interface
– Record (print)
– Extra functions
2. Application programs
3. Input
4. Information
5. Language setting
Factory Settings for the Parameters
The factory-set configurations are
i dentified by an "o" in the list below.
Customer-specific settings can be
configured on request.
Preparation
$ Using the CAS-Suite configuration soft-
ware from Sartorius installed on a PC,
you can process the operating menu
parameters as follows:
– Read
– Edit
– Print
– Save
or
Using the optional YAC01ED
control unit
Configuring of the weigh cell, i.e., adapting it to individual requirements.
Functions of the Keys in the Menu:
Symbol displayed Key
b
V
u
>
u
↵
c
(press and hold) S ave settings and exit menu
c
<<
c
<
Function
Set menu item
One menu level lower
(with cursor right up to 4 menu levels)
Confirm menu item
from any position
Save settings and exit menu:
One menu level higher (left cursor)
Indicates menu level
15