Operation With The Optional Yac01Ed Display And Control Unit; Overview Of Display And Operating Elements - Sartorius WZA N Series Installation Instructions Manual

Operation with the Optional YAC01ED Display and Control Unit

Connect display and control supplied to the weigh cell electronic unit using cable.
Connecting cable: Approx. 1 meter long with 15-pin D-Sub plug and socket.
Pin 15 is not assigned.

Overview of Display and Operating Elements

Position Designation
1 Weight units
2 Menu level indicator
3 Tare | Zero
4 S ymbol "GLP printing mode
active"
5 Symbol: "Printing mode active"
6 Application program active
7 D ata output:
Press this key to send readout
values to the built-in data
i nterface.
8 C alculated-value indicator:
not a weight value
9 Start an application program
10 Display: Gross or net value
11 S elect an application program |
Open the operating menu
12 S ymbols for active application
(W, Z, L, V, R, A, C)
Position Designation
13 Clear Function
T his key is generally used to
cancel functions:
– Q uit application program
– C ancel calibration/adjustment
routine | Exit menu
14 Start the calibration process
15 On/off switch
16 D isplay: Calibration/adjustment
function
17 Symbols for zero range
(verified models only)
18 W eight value displayed in
selected weight unit
Symbol:
<< Exit menu
< One menu level higher
V Scroll through menu items
> T o select the next sub-item
within a group
↵ T o confirm the menu item
selected
13