Shipping | Disposal; Shipping; Disposal - Sartorius WZA N Series Installation Instructions Manual

Shipping | Disposal

Shipping

Returning the Device and Parts
Defective devices or parts can be sent back to Sartorius. Returned devices must be
clean, decontaminated, and properly packed. Transport damage as well as measures
for subsequent cleaning and disinfection of the device or parts by Sartorius shall be
charged to sender.
§ Decommission the device.
§ Contact Sartorius Service for instructions on how to return devices or parts (please refer
to www.sartorius.com).
§ Pack the device and its parts properly for return.

Disposal

Information on Decontamination
The device does not contain any hazardous materials that would necessitate special
disposal measures. Contaminated samples used during the process that could cause
biological or chemical hazards are potentially hazardous materials.
If the device has come into contact with hazardous substances: Steps must be taken to
ensure proper decontamination and declaration. The operator is responsible for adhering
to local government regulations on the proper declaration for transport and disposal and
the proper disposal of the device.
Disassembly
§ Remove the weigh cell from the system.
Disposing of the Device and Parts
The device and the device accessories must be disposed of properly by disposal
facilities. The packaging is made of environmentally friendly materials that can be
used as secondary raw materials.
§ Dispose of the device. Follow the disposal instructions on our website
(www.sartorius.com).
§ Dispose of the packaging in accordance with local government regulations.
33