Table of Contents
Advertisement
C a l i p e r B r a k e P a d R e m o v a l
1
Remove the brake caliper from the fork or frame.
Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed.
2
Use needle nose pliers to remove the E-clip from the pad retention
bolt.
Remove the pad retention bolt from the caliper.
3
Remove the brake pads and pad h-spring from the caliper.
Brake pads must be replaced if the total thickness of the backing
plate and pad friction material is less than 3 mm.
NOTI CE
Needle nose pliers
Digital Caliper
Caliper Brake Pad Removal
2.5 mm
20 mm or 15 mm Thru Axle
11
Advertisement
Table of Contents
