Lever Service; Parts And Tools Needed For Service - SRAM G2 Ultimate Service Manual

Hide thumbs Also See for G2 Ultimate:

Table of Contents

L e v e r S e r v i c e

P a r t s a n d T o o l s N e e d e d f o r S e r v i c e

Parts

• Disc Brake Lever Internals/Service Kit - (Includes Piston Assembly,

Bladder & Spring) - G2 RSC/Ultimate

Safety and Protection Supplies

• Safety glasses

• Nitrile gloves

• Oil pan

• Clean, lint-free shop towel

Lubricants and Fluids

• Isopropyl alcohol

• Loctite Threadlocker Blue 242

• SRAM High-Performance DOT 5.1 brake fluid. If SRAM fluid is not

available, only use DOT 5.1 or 4 brake fluid.

• SRAM or AVID DOT grease. If SRAM or AVID DOT grease is not

available only use a DOT compatible grease.

Common Tools

• Needle nose pliers

• Pick with a 90 degree bent tip

• T8, T10, & T25 TORX wrench

• T8 & T10 TORX bit socket

• 8 mm flare nut crowfoot wrench

• 2, 2.5, & 4 mm hex wrenches

• 6 mm socket

• Torque wrench

SRAM Tools

• Lever Internals Assembly Tool - G2 RSC/Ultimate

(included in Lever Internals Service Kit)

• Lever Pivot Bearing Press Tool- for bearing replacement

• SRAM Hydraulic Hose Cutter

Lever Service

Table of Contents

G2 rsc