Table of Contents
Advertisement
5
To install a new bearing insert the threaded bearing press into the lever
body with the flat face toward the bearing bore.
6
Place a new bearing into the bearing bore.
Install the bearing press onto the bearing press bolt and thread into the
threaded bearing press.
Do not reuse bearings that have been removed.
7
Tighten the bearing press bolt until the bearing is pressed into the
lever body.
Unthread the bearing press bolt to remove the tools from the lever
body.
Repeat steps 5-7 to install the other new bearing.
To continue with lever service, go to
If you do not need to service your lever internals, go to
Piston Assembly Removal, page
Lever Blade Installation, page 31
2.5
24.
to assemble the brake lever.
20 mm or 15 mm Thru Axle
G2 Ultimate Lever Bearing Replacement
40
Advertisement
Table of Contents
