Speed/Travelled distance "SPEED":
Use buttons (1) and (2) to select the flashing item
"SPEED" (Fig 89) and press button (4).
The display shows the 2 available units of
measurement "Km/h" and "mph", with the one
selected flashing (Fig 90).
This phase can be interrupted by pressing button (2)
for 2 seconds.
Otherwise, with buttons (1) and (2) it is possible to
select the desired unit of measurement that will
start to flash. Press button (4) to confirm.
Successively, the display will show the flashing
"SPEED" indication again (Fig 89).
The modification of the unit of measurement for this
value concerns the following functions:
-
TOT, TRIP 1, TRIP 2, RANGE (km – miles)
-
Vehicle speed (Km/h - mph)
1
4
2
Fig 89
1
4
2
Fig 90
95