Ducati Scrambler 800 Desert Sled 2019 Owner's Manual page 129

Low/high beam (version with DRL)
At Key-On, the high beam and low beam lights are
OFF: only the parking lights and the DRL light are
turned on.
After starting the engine the low beam is
automatically switched on if the AUTO mode is set
and the instrument panel detects poor ambient light
(NIGHT): if, on the other hand, the instrument panel
detects good light conditions (DAY), the DRL light
remains on and the low beam remains off.
If within 60 seconds from the "manual" switching on
of the low / high beam the engine is not started, the
lights are disabled again (off).
It is possible to switch from DRL to low beam and
vice versa with button (5).
It the low beam is activated, it is possible to switch on
the high beam with button (7, Fig 132) position (A), or
flash with button (3, Fig 132).
If engine is not started upon key-on, it is anyway
possible to switch low/high beams on by pushing
button (7, Fig 132) positions (B) and (A), or flash with
button (3, Fig 132) on LH switch.
To preserve the motorcycle battery, if when starting
the engine the high/low beams or the DRL lights are
128
5
ON, the headlight is automatically switched off and
then on again when the engine is started.
Fig 133