ABS system activation
The ABS system activation is possible only with
vehicle speed lower than or equal to 5 km/h (3 mph).
To activate the ABS system select the "ABS:ON"
function using button (1) or button (2) and then press
button (4).
After pressing button (4), the message "WAIT" will
be displayed for 2 seconds instead of "ABS: ON"
(Fig 33).
After 2 seconds, if the ABS system has been
activated correctly, the display will show the previous
screen but with the message "ABS:OFF".
Note
If during the ABS system status change the
instrument panel detects an error, the message
"ABS:ERR" will be displayed flashing for 3 seconds
instead of "WAIT". Then, it will display again the
function with the previous status of the ABS system,
so that the action can be repeated.
1
4
2
Fig 32
1
4
2
Fig 33
53