When entering this function, the instrument panel
will display the currently set time with the colon ":"
flashing (Fig 65).
To exit the function without setting or changing the
time, press button (2) for 2 seconds.
Press button (4) to set the time.
AM/PM setting
The first parameter that can be modified is AM / PM.
The value currently set is displayed flashing (Fig 66).
Use buttons (1) and (2) to toggle from "AM" to "PM"
and vice versa.
Press button (4) to confirm the value selected and go
to the hour setting.
80
4
2
Fig 65
1
4
2
Fig 66