Handling Powder Paints; Using In Accordance With The Instructions; For Use In Potentially Explosive Areas; Explosion Protection Identification - WAGNER PEM-C4-Ergo Original Operating Manual

VERSION 02/2009
OPERATING MANUAL
2.2.5

HANDLING POWDER PAINTS

Take note of the processing regulations laid down by the manufacturer of the powder
paint being used, when preparing or processing the powder.
Take note of the manufacturer's advice and the relevant environmental protection
regulations when disposing of powder paints.
Implement the prescribed safety measures, in particular the wearing of safety glasses
and safety clothing as well as the use of protective hand cream.
Use dust masks or breathing apparatus.
To ensure sufficient protection of health and the environment, only operate the device
in a powder booth or at a spray wall with activated ventilation (exhaust air).
2.3

USING IN ACCORDANCE WITH THE INSTRUCTIONS

2.4

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

2.4.1
USING IN ACCORDANCE WITH THE INSTRUCTIONS
This type A-P powder electrostatic gun is suited to processing industrial powder paints for
coating electro-conductive objects and can be used in potentially explosive atmospheres.
(See explosion protection identifi cation).
2.4.2

EXPLOSION PROTECTION IDENTIFICATION

II 2 D EEx 2mJ 85°C
0102
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 gun
D: Ex-atmosphere dust
2mJ: max. fi ring power 2 mJ
85°C: max. surface temperature
ORDER NUMBER DOC2305054
PEM-C4-Ergo.
8