VERSION 02/2009
OPERATING MANUAL
5.3
GROUNDING
Heavy paint mist if earthing is insufficient!
Risk of poisoning
Insufficient paint application quality
SIHI_0003_GB
For safety reasons, the spray gun must be properly grounded. This occurs through the
electrical cable.
Good grounding of the workpiece is also necessary for optimum powder coating.
A poorly grounded workpiece causes:
Dangerous electric charging of the workpiece
●
Very bad wrap around
●
●
Uneven coating
Backspraying to the spray gun, i.e. contamination
●
Sparks between workpiece and conveyor hooks (hangers) can occur if hooks or
other hanger parts are not completely cleaned! These sparks can cause heavy radio
frequency interference (Electro-magnetic compatibility = EMC).
ORDER NUMBER DOC2305054
Earth all unit components.
Earth the workpieces being painted.
WARNING
PEM-C4-Ergo.
19