Safety Instructions For Staff; Safe Handling Of Wagner Powder Spray Units; Earth The Unit; Material Hoses - WAGNER PEM-C4-Ergo Original Operating Manual

VERSION 02/2009
OPERATING MANUAL
2.2

SAFETY INSTRUCTIONS FOR STAFF

Always follow the information in these instructions, particularly the general safety
instructions and the warning instructions.
Always follow local regulations concerning occupational safety and accident
prevention.
Under no circumstances should persons with pacemakers be in the area where the
high voltage field between the spray gun and the workpiece to be coated builds up!
2.2.1

SAFE HANDLING OF WAGNER POWDER SPRAY UNITS

Never point the powder spray gun at people.
Before all work on the unit, in the event of work interruptions and functional faults:
– Switch off the energy/compressed air supply.
– Secure the powder spray gun against actuation.
– Relieve the pressure from the powder spray gun and unit.
– By functional faults: Identify and correct the problem, proceed as described in chap.
"Trouble shooting".
2.2.2

EARTH THE UNIT

The electrostatic charge may, in certain cases, give rise to electrostatic charges on the
device.These can involve with unloading transmitting or flame formation.
Ensure that the device is grounded before each coating process.
Earth the workpieces being painted.
Ensure that all persons inside the working area are earthed, e.g. that they are wearing
antistatic shoes.
Grounding cables must be checked regularly to ensure that they are serviceable
(see EN 60204).
2.2.3

MATERIAL HOSES

➞ Only use original Wagner powder hose.
2.2.4

CLEANING

De-energize the unit electrically.
Disconnect the pneumatic supply line.
Relieve the pressure from the unit.
Secure the control unit against being switched back on without authorisation.
Only mobile industrial vacuum cleaners of design 1 (see ZH 1/487 for C dusts) may be
used for getting rid of dust build-ups.
ORDER NUMBER DOC2305054
PEM-C4-Ergo.
7