WAGNER PEM-C4-Ergo Original Operating Manual page 28

VERSION 02/2009
OPERATING MANUAL
Hint:
For inserting the protective wedge the same wedge tool will be used.
1
2
3
P_00597
2
3
ORDER NUMBER DOC2305054
Y
1
X
Y
1 Wedge tool
2 Protective wedge
3 Electrode holder (cut open view)
Procedure:
1. Guide the protective wedge 2 into the
wedge tool 1.
2. Insert both parts in the opening on the
electrode holder to the stop.
P_00598
3. If it is not possible to push the wedge tool in
as far as the mark X, rotate the wedge tool
a little until it can be pushed into the mark.
The mark X must be fl ush with the end Y
of the electrode holder.
4. The protective wedge is now correctly
assembled and the wedge tool can be
pulled back out of the electrode holder.
X
The protective wedge remains inserted
in the electrode holder.
P_00599
PEM-C4-Ergo.
28