Cleaning The Spray Gun And Dismantling The Fan Spray Nozzle - WAGNER PEM-C4-Ergo Original Operating Manual

VERSION 02/2009
OPERATING MANUAL
7.2

CLEANING THE SPRAY GUN AND DISMANTLING THE FAN SPRAY NOZZLE

3
2
1
P_00591
P_00592
P_00593
In the next section it is described how the protective wedge is to be dismantled and
inserted.
ORDER NUMBER DOC2305054
Procedure:
1. Unscrew the outer nut 1 from the spray gun housing 5.
2. Pull the fan spray nozzle 2 off the electrode holder 3.
3. Carefully pull the electrode holder 3 out of the spray gun
housing 5.
Hint:
Do not damage the electrode holder, when pulling out and
inserting.
4. Remove powder residue from the parts removed and from the
spray gun.
5
Hint:
Never place the spray gun or parts of the spray gun in cleaning
agent.
As a rule you only need to check the protective wedge for wear
and replace it as necessary.
New protective wedge
Worn protective wedge
We recommended replacing the protective wedge.
PEM-C4-Ergo.
26