Breaks And Finishing Work; Cleaning And Maintenance; Storage - WAGNER FURNO 550 18V Manual

Furno 550 18V

11. Breaks and finishing work

When the battery is switched off/removed, the current temperature setting is When the battery is switched off/removed, the current temperature setting is
i
automatically saved for the next application. automatically saved for the next application.
1. Release the trigger (5).
The nozzle must always point upwards. If the nozzle points downwards, the The nozzle must always point upwards. If the nozzle points downwards, the
i
hot air will remain in the gun and its lifespan may be shortened. Do not place hot air will remain in the gun and its lifespan may be shortened. Do not place
a hot gun on its side, since this will extend the cooling time. a hot gun on its side, since this will extend the cooling time.
2. 2. Place the heat gun on a flat surface. Place the heat gun on a flat surface.
3. Let the heat gun cool down.
4. Press the battery lock (9) and remove the battery when you have finished your
work.

12. Cleaning and Maintenance

Keep the intake openings on the housing clean and free of obstructions. Use a soft,
dry brush to clean the openings periodically. Use only mild soap and a damp cloth to
clean the Heat Gun. Many household cleaners contain chemicals which could seriously
damage the housing.
Do not use petroleum, turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products when cleaning the Heat Gun.
NEVER allow any liquid to get inside the tool or immerse any part of the tool into a
liquid. Cleaning and user maintenance shall not be made by children.
The nozzle will turn dark over time because of the high heat. This is normal The nozzle will turn dark over time because of the high heat. This is normal
i
and will not affect the performance or life of the unit. and will not affect the performance or life of the unit.

13. Storage

Only store the heat gun once it has completely cooled down.
EN
23