Optional Equipment; Gyro Converter Gc-10 - Furuno 2167DS-BB Installation Manual

4. OPTIONAL EQUIPMENT

4.1 Gyro Converter GC-10

The Gyro Converter GC-10, incorporated inside the processor unit, converts analog gyrocompass
reading into digital coded bearing data for display on the radar screen.
This section explains how to install the GC-10 (mainly consisting of the GYRO CONVERTER
board) and set it up according to the gyrocompass connected.
Installing the GYRO CONVERTER board
Necessary Parts: Gyro Converter GC-10-2 (Code no. 000-080-440)
See packing list at the back of this manual for details.
1. Open the processor unit.
Processor unit, inside view
4-1