Furuno 2167DS-BB Installation Manual page 58

2. Fasten the GYRO CONVERTER board inside the processor unit with five washer head screws.
3. Fix connector 231-607/019-FUR (called J602) with two screws.
Screw
M3X8 5 pcs
Fixing GYRO CONVERTER board inside the processor unit
4. Connect the GYRO CONVERTER board to the 03P9342 board with XH-PH 03-2088 connector
assy. (6-14P) and NH connector assy. 03-2091.
4-2
GYRO CONVERTER board
64P1106A
Screw
M2.6X10 2 pcs
Connector (231)
231-107/026-FUR
Connector (231)
231-607/019-FUR
PCB 03P9342