Furuno 2167DS-BB Installation Manual page 12

How to hoist the antenna unit
1. Fix the antenna radiator to the antenna unit chassis as shown on page 1-3.
2. Attach the lifting fixtures and collars as shown below.
3. Position the radiator as shown below and arrange the ropes A and B.
Lifting hook (2 pcs.)
1-4
Lifting fixture
Collar
Spring washer
Flat washer (M12)
Remove lifting fixture, coat threads
of hex bolts with silicone grease, and
then insert bolts in antenna chassis.
A 2m
Attachment of lifting fixtures, collar and ropes
Supplied as accessories.
Remove after installation.
Spring washer
Hex bolt (M12x20)
(Torque: 63.5 Nm)
B
*
*
* 2. Place protective material
(cardboard, foam, etc.) between
rope and radiator at the
asterisk-marked locations, to
prevent damage to radiator.
1.8m