2.
General Information
2.1
Product Assistance
Help on installation, calibration, and the use of LeCroy equipment is available from your
local LeCroy office, or from LeCroy's
• Customer Care Center, 700 Chestnut Ridge Road, Chestnut Ridge,
New York
• European Service Center,
Geneva Switzerland, tel. (41) 22/719 21 11.
• LeCroy Japan Corporation, Sasazuka Center Bldg – 6
Sasazuka, Shibuya-ku, Tokyo Japan 151-0073, tel. (81) 3 3376 9400
2.2
Installation for Safe and Efficient Operation
Operating Environment
The oscilloscope will operate to its specifications if the environment is maintained within
the following parameters:
Temperature ................5 to 40 °C (41 to 104 °F) rated.
Humidity .......................Maximum relative humidity 80 % RH (non-condensing) for
Altitude .........................2000 m (6560 ft)
The oscilloscope has been qualified to the following EN61010-1 category:
Installation (Overvoltage) CategoryII
Pollution Degree .............................2
Safety Symbols
Where these symbols or indications appear on the front or rear panels, and in this
manual, they have the following meanings
10977–6499, U.S.A., tel. (845) 578–6020
4, Rue Moïse Marcinhes
temperatures up to 31 °C decreasing linearly to 50 % relative humidity
at 40 °C
, Case postale 341, 1217 Meyrin 1,
th
floor, 1-6, 2-Chome,
:
General Information 2-1