LeCroy WaveSurfer 400 Series Service Manual page 160

D. Removal of the Front Panel Assembly
Procedure:
•
Remove the four KB (+) 3x6 screws (Item Fig No.20) that secure the front panel
assembly from the main chassis. D1
•
Loose the two KB3X6 (Item Fig No.20) screws on the FRONT END ASSY.
•
Carefully pivot up the Front Panel Assembly.
•
Disconnect the four cables from the Front Panel Assembly like step1 to 4.
Remove the three KB (+) 3x6 screws on the each side frames R and L
[D1]
[D2]
7-10 Mechanical Parts & Removal
D3
Extra care must be taken
to make sure that no
cables get pinched while
pivoting up the Front Panel
Assembly.
D2
D4