Bios Setting - LeCroy WaveSurfer 400 Series Service Manual

6.4.2.9

BIOS setting

If the system does not boot up on the start-up floppy disk, please confirm "First Boot
Device" in the "Advanced BIOS Features" of the BIOS setting. Turn on the power while
pushing the Delete Key.
STANDARD CMOS Features
Date (mm: dd: yy):
Time (hh: mm: ss):
IDE Primary Master
IDE Primary
Access Mode
IDE Primary Slave
IDE Primary Slave
Access Mode
IDE Secondary Master
IDE Secondary Master
Access Mode
IDE Secondary Slave
IDE Secondary Slave
Access Mode
Drive A : None
Drive B : None
Video
Halt On : All, But keyboard
Advanced BIOS Features
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power on Self Test
Boot Sequence
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up Numlock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate(Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM>64Mb
Video BIOS Shadow
Small Logo (EPA) Show
Advanced Chipset Features
DRAM Clock/Drive Control
: EGA/VGA
: Disabled
None
Auto
Auto
None
Auto
Auto
None
Auto
Auto
None
Auto
Auto
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: USB-FDD
: USB-CDROM
: HDD-O
: Enabled
: Disabled
: Disabled
: On
: Fast
: Disabled
: 6
: 250
: Setup
: Non-OS2
: Enabled
Maintenance 6-25