Cooler And Condensing Unit Placement - Vitrifrigo SLIM 150 Installation Use And Assistance Manual

9. Cooler and condensing unit placement

Place the fridge on a flat and stable surface.
The fridge is equipped with #4 fixing points.
Before installing, it is necessary to drill the insulated box in these points.
We recommend to use screws 3.9x16 (not supplied).
To have access in all fixing points, is necessary remove the drawer.
The condensing unit can be remoted up to 1.5 m from the fridge cabinet.
Place the unit to ensure an adequate ventilation and away from heat sources.
The fridge is provided with condensing unit connected by quick joints.
Be sure to connect the condensate drain hose to avoid water stagnation.
After installation, cover the bushings with the supplied caps.
29
EN EN