Table of Contents
Advertisement
User's Guide
2.4.4 Installing M.2
Step 1: The step here is the same as above chapter "2.4.1 Installing HDD/SSD Module -Step 1", For
details, please refer to the above chapter "2.4.1 Installing HDD/SSD Module -Step 1"
Step 2:The step here is the same as above chapter "2.4.1 Installing HDD/SSD Module -Step 2", For
details, please refer to the above chapter "2.4.1 Installing HDD/SSD Module -Step 2"
Step 3: The step here is the same as above chapter "2.4.3 Installing mSATA Module -Step 3", For details,
please refer to the above chapter "2.4.1 Installing HDD/SSD Module -Step 3"
Step 4:The step here is the same as above chapter "2.4.3 Installing mSATA Module -Step 4", For details,
please refer to the above chapter "2.4.3 Installing mSATA Module -Step 4"
Step 5: The step here is the same as above chapter "2.4.3 Installing mSATA Module -Step 5", For details,
please refer to the above chapter "2.4.3 Installing mSATA Module -Step 5"
Step 6:Hold the M.2 module with its notch aligned with the NGFF socket of the sub-board and insert it at
a 30 degrees angle into the socket (Note: Pay attention to avoiding the hard disk cable during the
installation process);
Step 7: Screw one screw to the holder as shown in the picture.
32
Advertisement
Table of Contents
