Installation; Hdd/Ssd Installation - JHCTech KMDA-3230 User Manual

User's Guide

2.4 Installation

Here the hardware installation takes KMDA-3230 series for example.

2.4.1 HDD/SSD Installation

Step 1: Unscrew the 4 screws on the edge of the bottom cover and take out the mounting bracket;
Step 2: Unscrew the 2 screws on the side of the bottom cover and take out the bottom cover;
Step 3: Put the HDD/SSD into the HDD/SSD bay and screw 4 screws as the picture shows;
Step 4: Fix the HDD/SSD bay on the bottom cover with 4 screws as shown in the picture.
Step 5: Connect the SATA cable and SATA power cord to the corresponding interface as the picture
shows;
Step 6: Tighten the bottom cover with 2 screws.
Step 7: Tighten the mounting bracket with 4 screws.
26