Parameters In The "Data Output" Main Menu - Sartorius Cubis MCE Operating Instructions Manual

System Settings
Parameters in the "USB" Submenu
Parameters Setting values
DEV.USED NONE*
[Device
Designation]
* Factory setting
7.3.3

Parameters in the "Data Output" Main Menu

Parameters in the "SBI Communication" Submenu
Parameters Setting values
COM. OUTP. IND.NO*
IND.AFTER
AUTO W/O
AUTO W/
STOP.AUTO OFF*
ON
AUTO.CYCL. EACH VAL*
2. VALUE
INTERV.
FORMAT 16 CHARS
22 CHARS
EXTR.LINE
AUTO.TARE OFF*
ON
* Factory setting
52 Operating Instructions Cubis
Explanation
Indicates that no device connection is detected at the USB port.
Displays the designation of the devices connected to the USB port.
Explanations
Starts the data output after pressing the key or software command as an
individual value without stability.
Starts the data output after pressing the key or software command as an
individual value after stability.
Activates the automatic data output without stability.
Activates the automatic data output after stability.
Deactivates the option to abort the automatic data output.
The automatic data output is aborted by pressing the [PRINT] key or a
software command.
Starts the automatic data output with a cycle after each value.
Starts the automatic data output with a cycle after every 2nd value.
Starts the automatic data output at the output rate set under "INPUT /
INTERV."
Data output provides 16 characters per line (16 characters for the measured
values only).
Data output provides 22 characters per line (16 characters for the measured
values and 6 characters for identifiers).
Data output provides an additional line with the date, time, and weight
value.
Deactivates automatic taring after data output.
The device automatically tares after data output.
MCE
®